Haworthia fasciata, often known as Zebra Plant, are beautiful little succulent houseplants that only reach a height of 5 to 8 inches. They feature large, green leaves with white tubercle bumps on the outermost layer that are grouped together for a “Zebra” impression.
Moreover, Zebra plants do not require much effort in terms of watering since they may survive for weeks without it. They’re also stunning in unique pots or different soil combinations, making them ideal for any interior setting!
Haworthia Zebra gets some light
As with all succulents, zebra plants thrive in low or medium-light environments, which are common in an indoor environment like this. To bring out their dazzling color, place them on a window sill facing south or east.
It is important to make sure that your Zebra plant gets at least 4 to 6 hours of strong light each day but no direct sunlight in the afternoon. As a result of their sensitive leaves, direct sunlight will almost certainly cause them to form dry tips, which is their way of signaling that they are receiving too much sunlight.
Taking Care of Your Zebra Plant
The Haworthia Zebra plant can be challenging to water, as too much water can cause root rot or discoloration, while too little can cause leaves to fall off.
Zebra plants do not like remaining wet for long periods of time, so water it generously until the excess runs out of the drainage holes in the container, then remove any excess that accumulates on the saucer.
After that, let the soil thoroughly dry until giving it another drink. You may check using a moisture meter or by inserting your finger into the second knuckle in the soil. If your Zebra Plant is thirsty, it’s time to give it a drink.
Wetting the leaves of the Zebra Plant can also produce difficulties, such as decay. If you accidentally spill water on their leaves, gently brush it away as soon as possible. Alternatively, every time you water this plant, use a squeeze bottle. This tool is highly recommended, especially for novices, because it will assist manage where the water travels, reducing the chance of soaking the leaves.
When your Zebra Plant develops discoloration and mushy leaves, do not water it. They are telling you that they are already getting too much water by doing this. Make sure all the damp dirt is removed from the root system of your Zebra to prevent your problem from getting worse. Allow your Haworthia to air dry for a few days before repotting.
Haworthia Zebra’s Soil
Cactus potting mixes are necessary for Zebra Plants as well as other succulents. It is also a good idea to mix pumice or perlite with potting soil and sand. The roots of Zebra Plants are rather lengthy, so you should plant them in a deep pot so that there is enough space for growing roots to develop.
Haworthia Zebra Temperature
Temperatures between 60 and 85 degrees Fahrenheit are ideal for growing Zebra Plants. This plant may thrive in zones 9 to 11 when grown outdoors.
If you live anywhere where the temperature drops below 30 degrees Fahrenheit, you should grow this succulent in a container that can be readily taken indoors to protect the plant’s health.
Zebra plants in a drainage hole in a Terracotta pot
Haworthia Zebra goes into dormancy during the warmest summer months, when temperatures are above 80 degrees Fahrenheit, and therefore is semi-dormant in the winter season. The plant’s development will be modest at this period, and you should water it less than normal. Just enough to keep the soil from drying up.
Indoor Haworthia Zebra, on the other hand, is unlikely to fall dormant. This is due to the fact that the temperature is not as hot as it is outside. So, before you start cutting back on your watering, keep an eye on the temperature around this plant.
How to Grow Haworthia Zebras
Zebra Haworthia propagation is straightforward and may be done with offsets or stem cuttings. However, most people prefer to do it this way since it is easier than utilizing stem cuttings.
Simply extract a 2-inch tall offset from the mother succulent by gently twisting it and allowing it to dry for 1 to 1 day. After your offsets have dried, put them in well-drained cactus soil and water them thoroughly.
It’s now up to you to choose a healthy stem cutting that is at least four to six inches long if you are going to use stem cuttings. Allow your clippings to dry completely before placing them in a perlite and damp peat mix.
To keep your cuttings wet, wrap them in plastic and store them somewhere with a temperature between 70 and 80 degrees Fahrenheit with indirect sunshine. Your cuttings should have produced new pups after around 3-4 weeks.
Frequently Asked Questions About Haworthia Plants
Is Haworthia suitable for indoor use?
They can withstand intense morning sunlight, but severe afternoon rays can scorch their leaves. Too much sun is frequently indicated by white, red, or yellow foliage. A plant’s green hue will fade if it does not receive enough light. Haworthias grow best near an east- or west-facing window inside.
Is my Haworthia going to need to be watered regularly?
Water. Haworthia does not require frequent watering since they store water so efficiently. Water only when the soil has been fully dry for many days. This might be every two weeks or more frequently in warmer months or climates.
Is Haworthia an aloe plant?
Hundreds of succulent plants are found in the genera Aloe, Gasteria, and Haworthia. They’re all easy to cultivate in containers. A few species can adapt to low-light interior circumstances and be cultivated as house plants. Aloe is a 400-species genus found in Africa, Arabia, and Madagascar.
Is Haworthia toxic to people?
Haworthia is not poisonous. Growing Sempervivum Hens and Chicks are safe, and they are not harmful if eaten.
What is the purpose of Haworthia?
Some species, such as Haworthia limifolia, have medicinal characteristics that aid in blood purification and the treatment of skin rashes, coughs, and other ailments.